مستر سامح رمضان

Lou Gray Lou Gray

0 دورة ملتحَق بها • 0 اكتملت الدورة

سيرة شخصية

Excellect 350-101 Pass Rate - Flexible 350-101 Learning Mode

Our 350-101 exam braindumps will give you a feeling that they will really make you satisfied. I know that we don't say much better than letting you experience it yourself. We very much welcome you to download the trial version of our 350-101 practice engine. Our ability to provide users with free trial versions of our 350-101 Study Materials is enough to prove our sincerity and confidence. Just free download the 350-101 learning guide, you will love it for sure!

Cisco 350-101 Exam Syllabus Topics:

Topic
Details

Topic 1

802.11 Technology Fundamentals: Covers Wi-Fi governance bodies, regional channel and power regulations, and the core technical principles of 802.11 including modulation, channel width, MIMO, topologies, and frame types.

Topic 2

Wireless Monitoring and Management: Covers network maintenance tasks, client monitoring configuration, troubleshooting client connectivity issues, and integrating with external devices and platforms.

Topic 3

Wireless Network Implementation: Covers Cisco wireless deployment architectures (Fabric, Mesh, Local, Cloud), physical infrastructure setup, and configuring management access for APs, WLCs, and dashboards.

Topic 4

RF Fundamentals: Covers the behavior of radio waves, how RF signals are measured and interpreted, the mathematics behind RF calculations, and the characteristics of Wi-Fi antennas.

Topic 5

Automation and AI: Covers Python scripting basics, NETCONF
YANG, wireless API interpretation, and AI-driven analytics, operations, and radio resource management within Catalyst Center.

Topic 6

Wireless Network Operation: Covers initial configuration of Cisco wireless infrastructure, AP discovery and join processes, AP modes, WLAN setup, and client management policies across platforms like Catalyst Center, ISE, and Spaces.

>> Excellect 350-101 Pass Rate <<

Pass Guaranteed 2026 350-101: Valid Excellect Implementing and Operating Cisco Wireless Core Technologies Pass Rate

With the help of TorrentValid’s marvelous brain dumps, you make sure your success in 350-101 certification exam with money back guarantee. TorrentValid serves a huge network of its clientele with the state of the art and exam-oriented short-term study content that requires as little as a two-week time to get ready the entire 350-101 Certification syllabus.

Cisco Implementing and Operating Cisco Wireless Core Technologies Sample Questions (Q45-Q50):

NEW QUESTION # 45
What defines device sensitivity in a wireless environment?

A. synchronization of beacon intervals
B. detection of redundant gateways
C. implementation of key refresh schedules
D. capability to process the signal

Answer: D

Explanation:
Device sensitivity in a wireless environment refers to receiver sensitivity: the minimum RF signal level a client or AP radio must receive to successfully detect, demodulate, and decode a transmission. Cisco defines receiver sensitivity as the minimum signal power level, expressed in dBm or mW, required for a receiver to accurately decode a given signal. Cisco RF design guidance further states that sensitivity indicates the lowest received power before the receiver considers the signal unintelligible.
Therefore, option A is correct because sensitivity is fundamentally about the radio's capability to process a received signal at low power levels. A more sensitive receiver can decode weaker frames, improving effective coverage and receive performance, provided the signal-to-noise ratio and interference conditions remain acceptable. Cisco also notes that individual device sensitivity determines how well a device can hear and demodulate RF energy, which directly affects contention behavior and WLAN performance in dense environments. Redundant gateways, beacon interval synchronization, and key refresh schedules are Layer 3 availability, 802.11 timing, and security-key management topics; they do not define RF receiver sensitivity.
Reference topics:RF Fundamentals - receiver sensitivity, RSSI, dBm, SNR, demodulation, and WLAN coverage behavior.

NEW QUESTION # 46
A network administrator at a marketing company is deploying a Cisco Catalyst 9800 Series Wireless Controller running Cisco IOS XE 17.x. The corporate WLAN named XYZ-Guest supports visitor devices. To address intermittent connectivity issues due to client association limits and short session timeouts, the network administrator must optimize the WLAN to allow more client connections and extend session timeouts for the devices. The administrator must set the maximum number of clients for the XYZ-Guest WLAN to 50 and must set a session timeout to prevent frequent device disconnections. Which two commands must be configured on the controller? (Choose two.)

A. wlan XYZ-Guest 1 XYZ-Guest client association limit 50
B. wireless profile policy XYZ-Guest-Pol session timeout 2800
C. wireless profile policy XYZ-Guest-Pol client session timeout 2800
D. wlan XYZ-Guest 1 XYZ-Guest client session timeout 2800
E. wlan XYZ-Guest 1 XYZ-Guest client max-association 50

Answer: A,D

Explanation:
On Cisco Catalyst 9800 Series WLCs running IOS XE 17.x, WLAN-specific client management parameters are configured under thewlan configuration context. To increase the number of client connections on the XYZ- Guest WLAN, the correct command iswlan XYZ-Guest 1 XYZ-Guest client association limit 50(orclient max- association 50depending on IOS XE version), which explicitly sets the maximum number of clients allowed per AP on this WLAN. To extend session durations and prevent frequent disconnections, theclient session timeoutcommand is applied under the same WLAN context with the desired timeout in seconds, e.g.,wlan XYZ-Guest 1 XYZ-Guest client session timeout 2800.
Profile-based session commands (options B and D) are part of wireless policy profiles, which define broader policy elements like QoS, radio settings, and security, butdo not directly enforce client association limits or session timeouts on the WLAN itself. Configuring these parameters at the WLAN level ensures that all APs associated with this WLAN apply the limits and timeout settings consistently. This approach aligns with Cisco best practices forClient Connectivity Configuration - WLAN client limits, session management, and IOS XE WLC optimization for guest networks.

NEW QUESTION # 47
A deployment requires that several APs be connected to edge switches, and each AP must support management and guest Wi-Fi traffic. The APs tag guest traffic separately from management, and the organization expects to add more VLANs for IoT and voice soon, so the configuration must support scalability. The security team requires that guest traffic never mix with internal resources. Which port configuration must be used for the switch interfaces that connect to the APs?

A. Configure the central Layer 3 switch port as an access VLAN port that allows the management VLAN only.
B. Set a trunk port with the management VLAN as the native VLAN, and allow only management and user VLANs.
C. Implement switch port access with the native VLAN for guest traffic and trunk with the management VLAN.
D. Make the port an access port on the management VLAN because all traffic is tunneled back to the WLC.

Answer: B

Explanation:
The switch interfaces connected to the APs must be configured as 802.1Q trunk ports. The requirement states that AP management and guest Wi-Fi traffic must remain separate, and additional VLANs for IoT and voice are expected. An access port supports only one VLAN, so it cannot scale for multiple locally tagged client VLANs. Cisco's Catalyst AP guidance states that when multiple VLANs are used for client traffic, the AP switch port should trunk the VLANs, and management traffic is untagged; when a management VLAN is used, it should be configured as the native VLAN on the switch port. Cisco's Catalyst 9800 FlexConnect documentation also shows the AP connected to a trunk port with a native VLAN for AP IP connectivity and a separate VLAN for locally switched client traffic.
Option C is therefore correct: configure a trunk, set the AP management VLAN as native, and restrict the allowed VLAN list to only required management and client VLANs such as guest, IoT, and voice. This supports segmentation and prevents unnecessary internal VLAN exposure. Reference topics:AP switch-port design, 802.1Q trunks, native VLANs, client VLAN tagging, FlexConnect/local switching, and guest traffic segmentation.

NEW QUESTION # 48
A school district is deploying Cisco Catalyst 9176 APs to remote sites with occasional WAN outages. The IT team wants the APs to attempt joining a secondary or tertiary Catalyst 9800 WLC if the primary controller is unreachable. The team must preconfigure all controller IP addresses using the AP CLI before deploying.
Which set of CLI commands sets the primary, secondary, and tertiary controller IP addresses on a Catalyst
9176 AP?

A. capwap ap wlc primary 10.10.10.10capwap ap wlc secondary 10.10.10.20capwap ap wlc tertiary
10.10.10.30
B. capwap ap primary-base main-wlc 10.10.10.10capwap ap secondary-base backup-wlc 10.10.10.20 capwap ap tertiary-base tertiary-wlc 10.10.10.30
C. set controller primary-base main-wlc 10.10.10.10set controller secondary-base backup 10.10.10.20set controller tertiary-base tertiary-wlc 10.10.10.30
D. ap join primary 10.10.10.10ap join secondary 10.10.10.20ap join tertiary 10.10.10.30

Answer: B

Explanation:
Cisco lightweight and Catalyst access points use CAPWAP for AP-to-controller discovery and join operations. For AP-side preconfiguration, Cisco documents the syntax as capwap ap {primary-base | secondary-base | tertiary-base} controller-name controller-ip-address, specifically for configuring primary, secondary, and tertiary controllers on the AP. This matches option B exactly because it includes the CAPWAP AP command, the controller priority keyword, the controller name, and the controller management IP address. (Cisco) The Catalyst 9800 AP join process also recognizes these configured controller entries in priority order:
primary controller using capwap ap primary-base, secondary controller using capwap ap secondary-base, and tertiary controller using capwap ap tertiary-base. (Cisco) This allows the AP to attempt a backup controller when the preferred controller is unavailable, which is appropriate for remote sites with intermittent WAN reachability. Option A uses obsolete or invalid setcontroller syntax. Option C invents an ap join command format. Option D incorrectly inserts wlc into the AP CAPWAP command. Reference topics:Wireless Network Implementation -CAPWAP discovery, AP join process, Catalyst 9800 controller redundancy, and AP CLI provisioning.

NEW QUESTION # 49
Refer to the exhibit.

A network administrator is working on a WLC to enable user access for contractor desktops using WPA2- Enterprise using EAP-TTLS. The administrator verified the external authentication configuration and now must test network connectivity. Which code snippet must be added to the box in the code to complete the configuration on the WLC that supports authentication with an external server?

A. aaa group server aaa RADIUS-GRP
B. aaa server group server radius RADIUS-GRP
C. aaa group server radius RADIUS-GRP
D. aaa server group server radius RADIUS-GRP

Answer: C

Explanation:
The missing command must create the RADIUS server group context before the existingserver name external- radiuscommand can bind the defined RADIUS server into that group. Cisco's Catalyst 9800 802.1X configuration workflow shows the exact CLI sequence: define the RADIUS server, then enteraaa group server radius < radius-grp-name > , then addserver name < radius-server-name > . The Catalyst 9800 configuration guide likewise states that the RADIUS server-group identification is created withaaa group server radius server-group, followed by the server name assignment.
In this exhibit,external-radiusis already declared underradius server, andaaa authentication dot1x CLIENT_GROUP group RADIUS-GRPalready points the 802.1X method list to the server group namedRADIUS-GRP. Therefore, the box must containaaa group server radius RADIUS-GRPso thatserver name external-radiusis syntactically valid and functionally associates the external server with the group. Cisco also identifies dot1x authentication lists as the AAA method type used for 802.1X SSIDs, with "group" directing authentication to an external RADIUS server. Reference topics:Client Connectivity Configuration
- WPA2-Enterprise, 802.1X/EAP, AAA method lists, RADIUS server groups, and Catalyst 9800 WLAN security

NEW QUESTION # 50
......

The Cisco 350-101 web-based practice test software is very user-friendly and simple to use. It is accessible on all browsers (Chrome, Firefox, MS Edge, Safari, Opera, etc). It will save your progress and give a report of your mistakes which will surely be beneficial for your overall 350-101 Exam Preparation.

Flexible 350-101 Learning Mode: https://www.torrentvalid.com/350-101-valid-braindumps-torrent.html

Lou Gray Lou Gray

سيرة شخصية

روايط سريعة

الدورات

للتواصل